Udkik.dk

Review of Hallberg-Rassy 352


Hallberg-Rassy 352
Hallberg-Rassy 352. HSS Sjælland Rundt På Indersiden


Basic specs.

sail specifications
The Hallberg-Rassy 352 or HR 352 is a motorsailer designed by the Swedish maritime architect Christoph Rassy together with Olle Enderlein also from Sweden in the late seventies. Several hundred boats have been produced. The Hallberg-Rassy 352 is built by the Swedish yard Hallberg-Rassy Varvs AB.

Looking for a new boat? Find a Hallberg-Rassy 352 or similar boat for sale

Hull
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.

Interior
The interior is like many other boats made of mahogany.
The boat is equipped with 6 berths, a galley and toilet facility.
The headroom is above average

Rig
The boat has more than one rig.

One option is a masthead rig. The advantage of a masthead rig is its simplicity and the fact that a given sail area - compared with a fractional rig - can be carried lower and thus with less heeling moment.

Keel

The Hallberg-Rassy 352 is equipped with a fin keel. The fin keel is the most common keel and provides splendid manoeuvrability. The downside is that it has less directional stability than a long keel.

Hallberg-Rassy 352 can enter most marinas as the draft is just about 1.68 - 1.78 meter (5.51 - 5.81 ft) dependent on the load. See immersion rate below.


Engine

The boat is typically equipped with an inboard Volvo Penta MD22 diesel engine.

The transmission is a shaft drive. A shaft drive will in the long run require less maintenence than other types of drive e.g. a sail drive.

The fuel tank has a capacity of 240.0 liters (63 US gallons, 52 imperial gallons).


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 7.2 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Hallberg-Rassy 352 is about 198 kg/cm, alternatively 1113 lbs/inch.
Meaning: if you load 198 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1113 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Hallberg-Rassy 352 is 3.10.

Slim Wide 62% 0 50 100
Compared with other similar sailboats it is more spacy than 62% of all other designs. It seems that the designer has chosen a slightly more spacy hull design.


Ballast Ratio

What is a Ballast Ratio?

The ballast ratio for Hallberg-Rassy 352 is 45%.

Low High 76% 0 50 100
This ballast ratio shows a righting moment that is higher than 76% of all similar sailboat designs. A righting moment (ability to resist heeling) significantly above average.


Over- / underrigged

Low High 34% 0 50 100
The Hallberg-Rassy 352 has more rig than 34% of all similar sailboats, which indicates that the boat is slightly underrigged.
It is expected that motor sailers are underrigged as this is the natural consequence of combining sailing and motor characteristics.


RSP (Relative Speed Performance)

What is Relative Speed Performance?

The Relative Speed Performance for Hallberg-Rassy 352 is 15

Slow Fast 15% 0 50 100
The relative speed performance is 15 which means that a it is faster than 15% of all similar sailboat designs. As this boat is a motor sailer, it is expected that the performance of a motor sailer for sail alone is lower than a dedicated sailboat.


Maintenance

Bottom Paint

When buying anti-fouling bottom paint, it's nice to know how much to buy. The surface of the wet bottom is about 33m2 (355 ft2).
Based on this, your favourite maritime shop can tell you the quantity you need.

Note: If you use a paint roller you will need more paint than if you use a paintbrush.


Rig

Dimensions of sail for masthead rig.

mainsail specifications genoa specifications spinnaker specifications

Are your sails worn out? You might find your next sail here: Sails for Sale



If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
Masthead rig
UsageLengthDiameter
Mainsail halyard 33.2 m(109.1 feet)12 mm(1/2 inch)
Jib/genoa halyard33.2 m(109.1 feet)12 mm(1/2 inch)
Spinnaker halyard33.2 m(109.1 feet)12 mm(1/2 inch)
Jib sheet 10.6 m(34.7 feet)14 mm(0.55 inch)
Genoa sheet10.6 m(34.7 feet)14 mm(0.55 inch)
Mainsheet 26.4 m(86.7 feet)14 mm(0.55 inch)
Spinnaker sheet23.3 m(76.3 feet)14 mm(0.55 inch)
Cunningham4.2 m(13.8 feet)12 mm(1/2 inch)
Kickingstrap8.4 m(27.6 feet)12 mm(1/2 inch)
Clew-outhaul8.4 m(27.6 feet)12 mm(1/2 inch)
Masthead rig
UsageLengthDiameter
Mainsail halyard 30.8 m(101.0 feet)12 mm(1/2 inch)
Jib/genoa halyard30.8 m(101.0 feet)12 mm(1/2 inch)
Spinnaker halyard30.8 m(101.0 feet)12 mm(1/2 inch)
Jib sheet 10.6 m(34.7 feet)14 mm(0.55 inch)
Genoa sheet10.6 m(34.7 feet)14 mm(0.55 inch)
Mainsheet 26.4 m(86.7 feet)14 mm(0.55 inch)
Spinnaker sheet23.3 m(76.3 feet)14 mm(0.55 inch)
Cunningham4.2 m(13.8 feet)12 mm(1/2 inch)
Kickingstrap8.4 m(27.6 feet)12 mm(1/2 inch)
Clew-outhaul8.4 m(27.6 feet)12 mm(1/2 inch)

Boat owner's ideas

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.



Finally

We are always looking for new photos. If you can contribute with photos for Hallberg-Rassy 352 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References