The boat can only enter major marinas as the draft is about 2.10 - 2.20 meter (6.89 - 7.19 ft) dependent on the load.
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
Sorry, we have no sailing characteristics available for this boat.
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
Sorry, we do not have sufficient statistical information available for this boat to provide a significant reliable analysis.
Dimensions of sail for fractional rig.
Are your sails worn out? You might find your next sail here: Sails for Sale
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
Usage | Length | Diameter | ||
Mainsail halyard | 41.3 m | (135.5 feet) | 6 mm | (1/4 inch) |
Jib/genoa halyard | 41.3 m | (135.5 feet) | 6 mm | (1/4 inch) |
Spinnaker halyard | 41.3 m | (135.5 feet) | 6 mm | (1/4 inch) |
Cunningham | 5.4 m | (17.7 feet) | 6 mm | (1/4 inch) |
Kickingstrap | 10.8 m | (35.4 feet) | 6 mm | (1/4 inch) |
Clew-outhaul | 10.8 m | (35.4 feet) | 6 mm | (1/4 inch) |
This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.
We are always looking for new photos. If you can contribute with photos for Finngulf 41 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.