Udkik.dk

Review of Artina 29


Basic specs.

sail specifications
The Artina 29 is a sailboat designed by the Finnish maritime architect Hans Groop in the early eighties. The Artina 29 is built by the Finnish yard Artekno OY.

Here we would have liked to show you nice photos of the Artina 29.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Artina 29 or similar boat for sale

Hull
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.
The hull is a double hull which improves the indoor climate. Especially when the water is colder than the air in the cabin, then the double hull insulates against cold water and reduce the condense water in the cabin.
The deck is a double deck which improves the indoor climate.

Rig
The boat has more than one rig.

One option is a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a genaker or a spinnaker for optimal speed.

Another option is a masthead rig. The advantage of a masthead rig is its simplicity and the fact that a given sail area - compared with a fractional rig - can be carried lower and thus with less heeling moment.

Keel

The Artina 29 is equipped with a fin keel. A boat with a fin keel is more manoeuvrable but has less directional stability than a similar boat with a long keel.

The keel is made of lead. Compared with iron, lead has the advantage of being 44% heavier, which allows a smaller keel and hence less water resistance and higher speed.

The boat can enter most marinas as the draft is just about 1.57 - 1.67 meter (5.15 - 5.45 ft) dependent on the load. See immersion rate below.


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Artina 29 is 2.05, indicating that this boat would not be accepted to participate in ocean races.


Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 6.6 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Artina 29 is about 147 kg/cm, alternatively 824 lbs/inch.
Meaning: if you load 147 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 824 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

Motion Comfort Ratio

What is Motion Comfort Ratio (MCR)?

The Motion Comfort Ratio for Artina 29 is 19.8.

Low High 34% 0 50 100
Comparing this ratio with similar sailboats show that it is more comfortable than 34% of all similar sailboat designs. This comfort value is just below average.


L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Artina 29 is 2.93.

Slim Wide 66% 0 50 100
Compared with other similar sailboats it is more spacy than 66% of all other designs. It seems that the designer has chosen a slightly more spacy hull design.


Ballast Ratio

What is a Ballast Ratio?

The ballast ratio for Artina 29 is 42%.

Low High 58% 0 50 100
This ballast ratio shows a righting moment that is higher than 58% of all similar sailboat designs. A righting moment (ability to resist heeling) just above average.


D/L (Displacement Length Ratio)

What is Displacement Length Ratio?

The DL-ratio for Artina 29 is 213 which categorizes this boat among 'light crusers & offshore racers'.

Heavy Light 69% 0 50 100
69% of all similar sailboat designs are categorized as heavier. A light displacement requires less sailarea and has higher accellerations.


SA/D (Sail Area Displacement ratio)

What is SA/D (Sail Area Displacement ratio)?

The SA/D for Artina 29 with ISO 8666 reference sail is 17.5, with a 135% genua the SA/D is 20.1.

Low High 69% 0 50 100
The SA/D ratio indicates that it is faster than 69% of all similar sailboat designs in light wind.


Over- / underrigged

Low High 69% 0 50 100
The Artina 29 has more rig than 69% of all similar sailboats, which indicates that the boat is slightly overrigged.


RSP (Relative Speed Performance)

What is Relative Speed Performance?

The Relative Speed Performance for Artina 29 is 88

Slow Fast 88% 0 50 100
The relative speed performance is 88 which means that a it is faster than 88% of all similar sailboat designs.


Maintenance

Bottom Paint

When buying anti-fouling bottom paint, it's nice to know how much to buy. The surface of the wet bottom is about 25m2 (269 ft2).
Based on this, your favourite maritime shop can tell you the quantity you need.

Note: If you use a paint roller you will need more paint than if you use a paintbrush.


Rig

Dimensions of sail for masthead rig.

mainsail specifications genoa specifications spinnaker specifications

Are your sails worn out? You might find your next sail here: Sails for Sale



If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
Masthead rig
UsageLengthDiameter
Mainsail halyard 29.3 m(96.1 feet)8 mm(5/16 inch)
Jib/genoa halyard29.3 m(96.1 feet)8 mm(5/16 inch)
Spinnaker halyard29.3 m(96.1 feet)8 mm(5/16 inch)
Jib sheet 8.7 m(28.5 feet)10 mm(3/8 inch)
Genoa sheet8.7 m(28.5 feet)10 mm(3/8 inch)
Mainsheet 21.8 m(71.4 feet)10 mm(3/8 inch)
Spinnaker sheet19.1 m(62.8 feet)10 mm(3/8 inch)
Cunningham3.8 m(12.3 feet)8 mm(5/16 inch)
Kickingstrap7.5 m(24.6 feet)8 mm(5/16 inch)
Clew-outhaul7.5 m(24.6 feet)8 mm(5/16 inch)
Fractional rig
UsageLengthDiameter
Mainsail halyard 29.3 m(96.1 feet)8 mm(5/16 inch)
Jib/genoa halyard29.3 m(96.1 feet)8 mm(5/16 inch)
Spinnaker halyard29.3 m(96.1 feet)8 mm(5/16 inch)
Jib sheet 8.7 m(28.5 feet)10 mm(3/8 inch)
Genoa sheet8.7 m(28.5 feet)10 mm(3/8 inch)
Mainsheet 21.8 m(71.4 feet)10 mm(3/8 inch)
Spinnaker sheet19.1 m(62.8 feet)10 mm(3/8 inch)
Cunningham3.8 m(12.3 feet)8 mm(5/16 inch)
Kickingstrap7.5 m(24.6 feet)8 mm(5/16 inch)
Clew-outhaul7.5 m(24.6 feet)8 mm(5/16 inch)

Boat owner's ideas

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.



Finally

We are always looking for new photos. If you can contribute with photos for Artina 29 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References