Review of Swan 432
Basic specs.
If you have a photo you would like to share: Upload Image
Looking for a new boat? Find a Swan 432 or similar boat for sale
The Swan 432 has been built with more than one type of keel.
One option is a long keel. A long keel provide a better directional stability than a similar boat with a fin keel; on the other hand, better directional stability means also that the boat is more difficult to handle in a harbour with less space.
Another option is a fin keel. A boat with a fin keel is more manoeuvrable but has less directional stability than a similar boat with a long keel.
The boat can enter most marinas as the draft is just about 1.77 - 1.87 meter (5.81 - 6.11 ft) dependent on the load.
The boat is typically equipped with an inboard Volvo Penta diesel engine.
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
Sorry, we have no sailing characteristics available for this boat.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
Sorry, we do not have sufficient statistical information available for this boat to provide a significant reliable analysis.
Maintenance
Dimensions of sail.
Are your sails worn out? You might find your next sail here: Sails for Sale
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
| Usage | Length | Diameter | ||
| Mainsail halyard | 39.4 m | (129.3 feet) | 14 mm | (0.55 inch) |
| Jib/genoa halyard | 39.4 m | (129.3 feet) | 14 mm | (0.55 inch) |
| Spinnaker halyard | 39.4 m | (129.3 feet) | 14 mm | (0.55 inch) |
| Jib sheet | 14.0 m | (45.8 feet) | 16 mm | (5/8 inch) |
| Genoa sheet | 14.0 m | (45.8 feet) | 16 mm | (5/8 inch) |
| Mainsheet | 34.9 m | (114.6 feet) | 16 mm | (5/8 inch) |
| Spinnaker sheet | 30.7 m | (100.8 feet) | 16 mm | (5/8 inch) |
| Cunningham | 4.6 m | (15.2 feet) | 14 mm | (0.55 inch) |
| Kickingstrap | 9.3 m | (30.4 feet) | 14 mm | (0.55 inch) |
| Clew-outhaul | 9.3 m | (30.4 feet) | 14 mm | (0.55 inch) |
This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.
We are always looking for new photos. If you can contribute with photos for Swan 432 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.