Review of Wellington 47
Basic specs.
Looking for a new boat? Find a Wellington 47 or similar boat for sale
The Wellington 47 is equipped with a centerboard keel. A centerboard keel is a pivoting lifting keel, allowing to sail both coastal and inland waters.
The boat can enter even shallow marinas as the draft is just about 1.47 - 1.57 meter (4.82 - 5.12 ft) dependent on the load. See immersion rate below.
The boat is typically equipped with an inboard Ford Lehman 4D-254 diesel engine at 185.0 hp (137 kW), which gives a max speed about 9.4 knots.
The fuel tank has a capacity of 1779.0 liters (469 US gallons, 391 imperial gallons).
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
What is Capsize Screening Formula (CSF)?
The capsize screening value for Wellington 47 is 1.52, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.
What is Theoretical Maximum Hull Speed?
The theoretical maximal speed of a displacement boat of this length is 8.3 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Wellington 47 is about 324 kg/cm, alternatively 1818 lbs/inch.
Meaning: if you load 324 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 1818 lbs cargo on the boat it will sink 1 inch.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is Motion Comfort Ratio (MCR)?
The Motion Comfort Ratio for Wellington 47 is 52.5.
What is L/B (Length Beam Ratio)?
The l/b ratio for Wellington 47 is 3.48.
The ballast ratio for Wellington 47 is 24%.
What is Displacement Length Ratio?
The DL-ratio for Wellington 47 is 347 which categorizes this boat among 'heavy cruisers'.
SA/D (Sail Area Displacement ratio)
Indicates how fast the boat is in light wind:
- Cruising Boats have ratios 10-15
- Cruiser-Racers have ratios 16-20
- Racers have ratios above 20
- High-Performance Racers have ratios above 24
Sail-area/displacement ratio (SA/D ratio): 14.02
Maintenance
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
| Usage | Length | Diameter | ||
| Jib sheet | 14.3 m | (46.9 feet) | 16 mm | (5/8 inch) |
| Genoa sheet | 14.3 m | (46.9 feet) | 16 mm | (5/8 inch) |
| Mainsheet | 35.8 m | (117.3 feet) | 16 mm | (5/8 inch) |
| Spinnaker sheet | 31.5 m | (103.2 feet) | 16 mm | (5/8 inch) |
This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.
We are always looking for new photos. If you can contribute with photos for Wellington 47 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.