Udkik.dk

Review of Sea Ray 300 Sundancer


Basic specs.

sail specifications
The Sea Ray 300 Sundancer aka Sea Ray SRV 300 SDA is a motorboat designed in the late eighties. The Sea Ray 300 Sundancer is built by the American yard Sea Ray.

Here we would have liked to show you nice photos of the Sea Ray 300 Sundancer.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Sea Ray 300 Sundancer or similar boat for sale

Hull
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.

Interior
The boat is equipped with 3 cabins, 4-7 berths, a galley and toilet facility.

Keel

The boat can enter even shallow marinas as the draft is just about 0.89 - 0.99 meter (2.92 - 3.22 ft) dependent on the load. See immersion rate below.


Engine

Sea Ray 300 Sundancer is typically equipped with dual inboard MerCruiser engines at 520.0 hp (387 kW).

The transmission is a Z-drive.

The fuel tank which is made of stainless steel has a capacity of 545.0 liters (143 US gallons, 119 imperial gallons).


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Sea Ray 300 Sundancer is about 202 kg/cm, alternatively 1136 lbs/inch.
Meaning: if you load 202 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1136 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Sea Ray 300 Sundancer is 2.70.

Slim Wide 90% 0 50 100
Compared with other similar motor boats it is more spacy than 90% of all other designs. It seems that the designer has chosen a significantly more spacy hull design.


Curiosities

Powerboat?

In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:

Equation for Danish definition of a powerboat
Danish definition of a powerboat
According to this definition this boat is categorized as a Powerboat.


Maintenance

Boat owner's ideas

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.



Finally

We are always looking for new photos. If you can contribute with photos for Sea Ray 300 Sundancer it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References