Udkik.dk

Review of Risør 23


Basic specs.

sail specifications
The Risør 23 is a small motorboat. The Risør 23 is built by Buvika Båtbyggeri A/S.

Here we would have liked to show you nice photos of the Risør 23.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Risør 23 or similar boat for sale

Hull
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.

Interior
The boat is equipped with 5 berths and a galley.

Keel

The boat can enter even shallow marinas as the draft is just about 0.70 - 0.80 meter (2.30 - 2.60 ft) dependent on the load. See immersion rate below.


Engine

Risør 23 is typically equipped with an inboard Volvo Penta engine at 23.0 hp (17 kW).

The fuel tank has a capacity of 45.0 liters (11 US gallons, 9 imperial gallons).


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Risør 23 is about 115 kg/cm, alternatively 646 lbs/inch.
Meaning: if you load 115 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 646 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Risør 23 is 2.85.

Wide Slim 62% 0 50 100
Compared with other similar motor boats it is slimmer than 62% of all other designs. It seems that the designer has chosen a slightly more speedy hull design.


Curiosities

Powerboat?

In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:

Equation for Danish definition of a powerboat
Danish definition of a powerboat
According to this definition this boat is not categorized as a Powerboat.
Though, if you install a motor of 52 kW (69 hp), then the boat will become a powerboat, and you will need a Danish 'powerboat driving license'


Maintenance

Boat owner's ideas

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.



Finally

We are always looking for new photos. If you can contribute with photos for Risør 23 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References