Udkik.dk

Review of Aluwind 56 New Classic


Basic specs.

sail specifications
The Aluwind 56 New Classic is a large sailboat designed by the Italian maritime architect bureau Zerbinati Design.

Here we would have liked to show you nice photos of the Aluwind 56 New Classic.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Aluwind 56 New Classic or similar boat for sale

Hull
The hull is made of aluminium.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Aluwind 56 New Classic is 1.62, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.


EU classification

Aluwind 56 New Classic holds one CE certification:

The boat is by European Union certified as Class A. OCEAN:
Designed for extended voyages where conditions may exceed wind force 8 (Beaufort scale) and significant wave heights of 4 m and above but excluding abnormal conditions, and vessels largely self-sufficient.


Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 9.5 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Aluwind 56 New Classic is about 458 kg/cm, alternatively 2566 lbs/inch.
Meaning: if you load 458 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 2566 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Aluwind 56 New Classic is 3.86.

Wide Slim 85% 0 50 100
Compared with other similar sailboats it is slimmer than 85% of all other designs. It seems that the designer has chosen a significantly more speedy hull design.


D/L (Displacement Length Ratio)

What is Displacement Length Ratio?

The DL-ratio for Aluwind 56 New Classic is 174 which categorizes this boat among 'light racers'.

Heavy Light 66% 0 50 100
66% of all similar sailboat designs are categorized as heavier. A light displacement requires less sailarea and has higher accellerations.


Maintenance

Rig

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Jib sheet 17.4 m(56.9 feet)16 mm(5/8 inch)
Genoa sheet 17.4 m(56.9 feet)16 mm(5/8 inch)
Mainsheet 43.4 m(142.3 feet)16 mm(5/8 inch)
Spinnaker sheet38.2 m(125.2 feet)16 mm(5/8 inch)

Boat owner's ideas

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.



Finally

We are always looking for new photos. If you can contribute with photos for Aluwind 56 New Classic it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References