Udkik.dk

Review of X46


Basic specs.

sail specifications
The X46 is a large sailboat. The X46 is built by the Danish yard X-Yachts A/S.

Here we would have liked to show you nice photos of the X46.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a X46 or similar boat for sale

Hull
The deck is a double deck which improves the indoor climate.

Interior
The boat is equipped with 3 cabins, 6 berths, a galley and toilet facility.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 8.5 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for X46 is about 352 kg/cm, alternatively 1975 lbs/inch.
Meaning: if you load 352 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1975 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for X46 is 3.16.

Slim Wide 76% 0 50 100
Compared with other similar sailboats it is more spacy than 76% of all other designs. It seems that the designer has chosen a significantly more spacy hull design.


Maintenance

Rig

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Jib sheet 13.5 m(44.3 feet)16 mm(5/8 inch)
Genoa sheet 13.5 m(44.3 feet)16 mm(5/8 inch)
Mainsheet 33.8 m(110.7 feet)16 mm(5/8 inch)
Spinnaker sheet29.7 m(97.4 feet)16 mm(5/8 inch)

Boat owner's ideas

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.



Finally

We are always looking for new photos. If you can contribute with photos for X46 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References