The boat can enter even shallow marinas as the draft is just about 0.45 - 0.55 meter (1.48 - 1.78 ft) dependent on the load. See immersion rate below.
Quicksilver 560 Timonier is typically equipped with an outboard engine at 50.0 hp (37 kW).
The fuel tank has a capacity of 130.0 liters (34 US gallons, 28 imperial gallons).
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
Quicksilver 560 Timonier holds one CE certification:
If less than 5 in on board the boat is by European Union certified as Class C. INSHORE:The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Quicksilver 560 Timonier is about 93 kg/cm, alternatively 521 lbs/inch.
Meaning: if you load 93 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 521 lbs cargo on the boat it will sink 1 inch.
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Quicksilver 560 Timonier is 2.26.
In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:
This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.
We are always looking for new photos. If you can contribute with photos for Quicksilver 560 Timonier it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.