Review of Pacific Seacraft 32 Pilothouse

Basic specs.

The Pacific Seacraft 32 Pilothouse is a sailboat designed by the British maritime architect William Ion Belton Crealock in the late seventies. Only a few boats have been produced.

Here we would have liked to show you nice photos of the Pacific Seacraft 32 Pilothouse.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Pacific Seacraft 32 Pilothouse or similar boat for sale

Hull

The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.

Interior

The headroom is above average

Rig

The boat equipped with a masthead rig. The advantage of a masthead rig is its simplicity and the fact that a given sail area - compared with a fractional rig - can be carried lower and thus with less heeling moment.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Pacific Seacraft 32 Pilothouse is 1.69, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.

Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 6.6 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Pacific Seacraft 32 Pilothouse is about 148 kg/cm, alternatively 831 lbs/inch.
Meaning: if you load 148 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 831 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

Motion Comfort Ratio

What is Motion Comfort Ratio (MCR)?

The Motion Comfort Ratio for Pacific Seacraft 32 Pilothouse is 34.3.

Comparing this ratio with similar sailboats show that it is more comfortable than 92% of all similar sailboat designs. This is a comfort value significantly above average.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Pacific Seacraft 32 Pilothouse is 3.34.

Compared with other similar sailboats it is slimmer than 62% of all other designs. It seems that the designer has chosen a slightly more speedy hull design.

D/L (Displacement Length Ratio)

What is Displacement Length Ratio?

The DL-ratio for Pacific Seacraft 32 Pilothouse is 394 which categorizes this boat among 'heavy cruisers'.

4% of all similar sailboat designs are categorized as heavier. A heavy displacement combined with smaller water plane area has lower acceleration and is more comfortable.

SA/D (Sail Area Displacement ratio)

What is SA/D (Sail Area Displacement ratio)?

The SA/D for Pacific Seacraft 32 Pilothouse with ISO 8666 reference sail is 14.4, with a 135% genua the SA/D is 17.4.

The SA/D ratio indicates that it is faster than 18% of all similar sailboat designs in light wind.

Maintenance

Rig

Dimensions of sail for masthead rig.

Are your sails worn out? You might find your next sail here: Sails for Sale

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.

**Guiding dimensions of running rig**
Usage	Length		Diameter
Mainsail halyard	25.6 m	(83.8 feet)	10 mm	(3/8 inch)
Jib/genoa halyard	25.6 m	(83.8 feet)	10 mm	(3/8 inch)
Spinnaker halyard	25.6 m	(83.8 feet)	10 mm	(3/8 inch)
Jib sheet	10.0 m	(32.8 feet)	12 mm	(1/2 inch)
Genoa sheet	10.0 m	(32.8 feet)	12 mm	(1/2 inch)
Mainsheet	25.0 m	(82.1 feet)	12 mm	(1/2 inch)
Spinnaker sheet	22.0 m	(72.3 feet)	12 mm	(1/2 inch)
Cunningham	3.9 m	(12.9 feet)	10 mm	(3/8 inch)
Kickingstrap	7.9 m	(25.9 feet)	10 mm	(3/8 inch)
Clew-outhaul	7.9 m	(25.9 feet)	10 mm	(3/8 inch)

Boat owner's ideas

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.

Finally

We are always looking for new photos. If you can contribute with photos for Pacific Seacraft 32 Pilothouse it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.

References

[Ref 1]: ISO 8666 Small craft — Principal data.
[Ref 3]: ISO 12215-5 Small craft — Hull construction and scantlings.