Udkik.dk

Review of Nordsee 57


Basic specs.

sail specifications
The Nordsee 57 is a large sailboat. The Nordsee 57 is built by the German yard Dübbel & Jesse GmbH.

Here we would have liked to show you nice photos of the Nordsee 57.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Nordsee 57 or similar boat for sale

Hull
The hull is made of aluminium.

Interior
The boat is equipped with 6 berths.

Keel

The boat can only enter major marinas as the draft is about 2.60 - 2.70 meter (8.53 - 8.83 ft) dependent on the load. See immersion rate below.


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Nordsee 57 is 1.83, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Nordsee 57 is about 596 kg/cm, alternatively 3342 lbs/inch.
Meaning: if you load 596 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 3342 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Nordsee 57 is 3.40.

Slim Wide 79% 0 50 100
Compared with other similar sailboats it is more spacy than 79% of all other designs. It seems that the designer has chosen a significantly more spacy hull design.


SA/D (Sail Area Displacement ratio)

SA/D (Sail Area Displacement ratio)
Indicates how fast the boat is in light wind:
- Cruising Boats have ratios 10-15
- Cruiser-Racers have ratios 16-20
- Racers have ratios above 20
- High-Performance Racers have ratios above 24
Sail-area/displacement ratio (SA/D ratio): 18.50


Maintenance

Rig

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Jib sheet 17.4 m(57.1 feet)16 mm(5/8 inch)
Genoa sheet17.4 m(57.1 feet)16 mm(5/8 inch)
Mainsheet 43.5 m(142.7 feet)16 mm(5/8 inch)
Spinnaker sheet38.3 m(125.6 feet)16 mm(5/8 inch)

Boat owner's ideas

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.



Finally

We are always looking for new photos. If you can contribute with photos for Nordsee 57 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References