Udkik.dk

Review of Maxus 33.1 RS


Basic specs.

sail specifications
The Maxus 33.1 RS is a sailboat designed by the Polish maritime architect Jacka Daszkiewicza. The Maxus 33.1 RS is built by the Polish yard Northman.

Here we would have liked to show you nice photos of the Maxus 33.1 RS.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Maxus 33.1 RS or similar boat for sale

Hull
Both the hull and the deck is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.

Interior
The boat is equipped with 8 berths and a galley.
The headroom is above average

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Maxus 33.1 RS is 1.95, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.


EU classification

Maxus 33.1 RS holds one CE certification:

The boat is by European Union certified as Class B. OFFSHORE:
Designed for offshore voyages where conditions up to, and including, wind force 8 (Beaufort scale) and significant wave heights up to, and including, 4 m may be experienced.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Maxus 33.1 RS is about 224 kg/cm, alternatively 1254 lbs/inch.
Meaning: if you load 224 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1254 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Maxus 33.1 RS is 3.11.

Slim Wide 58% 0 50 100
Compared with other similar sailboats it is more spacy than 58% of all other designs. It seems that the designer has chosen a slightly more spacy hull design.


Maintenance

Rig

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Jib sheet 9.9 m(32.6 feet)12 mm(1/2 inch)
Genoa sheet 9.9 m(32.6 feet)12 mm(1/2 inch)
Mainsheet 24.9 m(81.6 feet)12 mm(1/2 inch)
Spinnaker sheet21.9 m(71.8 feet)12 mm(1/2 inch)

Boat owner's ideas

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.



Finally

We are always looking for new photos. If you can contribute with photos for Maxus 33.1 RS it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References