Review of Mancini 46 Ketch

Basic specs.

The Mancini 46 Ketch is a large sailboat designed by the Italian maritime architect Carlo Sciarrelli.

Here we would have liked to show you nice photos of the Mancini 46 Ketch.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Mancini 46 Ketch or similar boat for sale

Interior

The boat is equipped with 8 berths.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Mancini 46 Ketch is 1.41, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.

EU classification

Mancini 46 Ketch holds one CE certification:

The boat is by European Union certified as Class A. OCEAN:

Designed for extended voyages where conditions may exceed wind force 8 (Beaufort scale) and significant wave heights of 4 m and above but excluding abnormal conditions, and vessels largely self-sufficient.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Mancini 46 Ketch is about 312 kg/cm, alternatively 1749 lbs/inch.
Meaning: if you load 312 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1749 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Mancini 46 Ketch is 4.20.

Compared with other similar sailboats it is slimmer than 99% of all other designs. It seems that the designer has chosen a significantly more speedy hull design. This type of design is also referred to as 'needle'.

Maintenance

Rig

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.

**Guiding dimensions of running rig**
Usage	Length		Diameter
Jib sheet	14.0 m	(45.9 feet)	16 mm	(5/8 inch)
Genoa sheet	14.0 m	(45.9 feet)	16 mm	(5/8 inch)
Mainsheet	35.0 m	(114.8 feet)	16 mm	(5/8 inch)
Spinnaker sheet	30.8 m	(101.0 feet)	16 mm	(5/8 inch)

Boat owner's ideas

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.

Finally

We are always looking for new photos. If you can contribute with photos for Mancini 46 Ketch it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.

References

[Ref 1]: ISO 8666 Small craft — Principal data.
[Ref 3]: ISO 12215-5 Small craft — Hull construction and scantlings.