Review of Conrad 66 ALU
Basic specs.
If you have a photo you would like to share: Upload Image
Looking for a new boat? Find a Conrad 66 ALU or similar boat for sale
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
What is Capsize Screening Formula (CSF)?
The capsize screening value for Conrad 66 ALU is 1.67, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Conrad 66 ALU is about 818 kg/cm, alternatively 4583 lbs/inch.
Meaning: if you load 818 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 4583 lbs cargo on the boat it will sink 1 inch.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Conrad 66 ALU is 3.33.
Sorry, we do not have sufficient statistical information available for this boat to provide a significant reliable analysis.
Maintenance
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
| Usage | Length | Diameter | ||
|---|---|---|---|---|
| Jib sheet | 20.2 m | (66.1 feet) | 16 mm | (5/8 inch) |
| Genoa sheet | 20.2 m | (66.1 feet) | 16 mm | (5/8 inch) |
| Mainsheet | 50.4 m | (165.4 feet) | 16 mm | (5/8 inch) |
| Spinnaker sheet | 44.4 m | (145.5 feet) | 16 mm | (5/8 inch) |
This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.
We are always looking for new photos. If you can contribute with photos for Conrad 66 ALU it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.