Udkik.dk

Review of Carter 39


Basic specs.

sail specifications
The Carter 39 is a sailboat designed by the British maritime architect Richard Carter. The Carter 39 is built by the Greek yard Olympic Yachts.

Here we would have liked to show you nice photos of the Carter 39.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Carter 39 or similar boat for sale

Hull
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.

Keel

The Carter 39 is equipped with a fin keel. The fin keel is the most common keel and provides splendid manoeuvrability. The downside is that it has less directional stability than a long keel.

The boat can only enter major marinas as the draft is about 2.15 - 2.25 meter (7.05 - 7.35 ft) dependent on the load. See immersion rate below.


Engine

The boat is typically equipped with an inboard Perkins 4.107 diesel engine at 50.0 hp (37 kW).


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Carter 39 is about 310 kg/cm, alternatively 1736 lbs/inch.
Meaning: if you load 310 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1736 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Carter 39 is 3.06.

Slim Wide 73% 0 50 100
Compared with other similar sailboats it is more spacy than 73% of all other designs. It seems that the designer has chosen a slightly more spacy hull design.


Maintenance

Rig

Dimensions of sail.

mainsail specifications headsail specifications

Are your sails worn out? You might find your next sail here: Sails for Sale



If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Mainsail halyard 36.3 m(119.3 feet)12 mm(1/2 inch)
Jib/genoa halyard36.3 m(119.3 feet)12 mm(1/2 inch)
Spinnaker halyard36.3 m(119.3 feet)12 mm(1/2 inch)
Jib sheet 11.9 m(39.0 feet)14 mm(0.55 inch)
Genoa sheet11.9 m(39.0 feet)14 mm(0.55 inch)
Mainsheet 29.8 m(97.6 feet)14 mm(0.55 inch)
Spinnaker sheet26.2 m(85.9 feet)14 mm(0.55 inch)
Cunningham3.8 m(12.6 feet)12 mm(1/2 inch)
Kickingstrap7.7 m(25.2 feet)12 mm(1/2 inch)
Clew-outhaul7.7 m(25.2 feet)12 mm(1/2 inch)

Boat owner's ideas

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.



Finally

We are always looking for new photos. If you can contribute with photos for Carter 39 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References