The keel is made of lead. Compared with iron, lead has the advantage of being 44% heavier, which allows a smaller keel and hence less water resistance and higher speed.
The boat can enter even shallow marinas as the draft is just about 1.37 - 1.47 meter (4.49 - 4.79 ft) dependent on the load. See immersion rate below.
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
What is Capsize Screening Formula (CSF)?
The capsize screening value for Mustang is 1.57, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Mustang is about 122 kg/cm, alternatively 687 lbs/inch.
Meaning: if you load 122 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 687 lbs cargo on the boat it will sink 1 inch.
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Mustang is 4.92.
The ballast ratio for Mustang is 58%.
What is SA/D (Sail Area Displacement ratio)?
The SA/D for Mustang with ISO 8666 reference sail is 18.3, with a 135% genua the SA/D is 20.5.
What is Relative Speed Performance?
The Relative Speed Performance for Mustang is 73
Dimensions of sail for fractional rig.
Are your sails worn out? You might find your next sail here: Sails for Sale
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
Usage | Length | Diameter | ||
Mainsail halyard | 26.3 m | (86.3 feet) | 10 mm | (3/8 inch) |
Jib/genoa halyard | 26.3 m | (86.3 feet) | 10 mm | (3/8 inch) |
Spinnaker halyard | 26.3 m | (86.3 feet) | 10 mm | (3/8 inch) |
Jib sheet | 9.5 m | (31.2 feet) | 12 mm | (1/2 inch) |
Genoa sheet | 9.5 m | (31.2 feet) | 12 mm | (1/2 inch) |
Mainsheet | 23.8 m | (77.9 feet) | 12 mm | (1/2 inch) |
Spinnaker sheet | 20.9 m | (68.6 feet) | 12 mm | (1/2 inch) |
Cunningham | 3.6 m | (11.8 feet) | 10 mm | (3/8 inch) |
Kickingstrap | 7.2 m | (23.6 feet) | 10 mm | (3/8 inch) |
Clew-outhaul | 7.2 m | (23.6 feet) | 10 mm | (3/8 inch) |
This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.
We are always looking for new photos. If you can contribute with photos for Mustang (Byqvist) it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.