Udkik.dk

Review of M 32


Basic specs.

sail specifications
The M 32 is a sailboat designed by the Swedish maritime architect Tord Arne Sundén.

Here we would have liked to show you nice photos of the M 32.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a M 32 or similar boat for sale

Interior
The boat is equipped with 6 berths, a galley and toilet facility.

Rig
The boat equipped with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a genaker or a spinnaker for optimal speed.

Engine

The boat is typically equipped with an inboard Volvo Penta MD2B diesel engine at 25.0 hp (18 kW).


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for M 32 is 2.01, indicating that this boat would not be accepted to participate in ocean races.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for M 32 is about 192 kg/cm, alternatively 1076 lbs/inch.
Meaning: if you load 192 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1076 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for M 32 is 3.19.

Wide Slim 54% 0 50 100
Compared with other similar sailboats it is slimmer than 54% of all other designs. It seems that the designer has chosen a slightly more speedy hull design.


Maintenance

Rig

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Jib sheet 9.6 m(31.4 feet)12 mm(1/2 inch)
Genoa sheet9.6 m(31.4 feet)12 mm(1/2 inch)
Mainsheet 23.9 m(78.4 feet)12 mm(1/2 inch)
Spinnaker sheet21.0 m(69.0 feet)12 mm(1/2 inch)

Boat owner's ideas

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.



Finally

We are always looking for new photos. If you can contribute with photos for M 32 (Sundén) it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References