Review of Starwind 18

Basic specs.

The Starwind 18 aka Buccaneer 18 is a small dinghy designed by the British maritime architect James Roderick Macalpine-Downie together with Dick Gibbs from in the early eighties. The Starwind 18 is built by the American yard Wellcraft Marine Corp.

Here we would have liked to show you nice photos of the Starwind 18.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Starwind 18 or similar boat for sale

Hull

The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.

Rig

The boat equipped with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a genaker or a spinnaker for optimal speed.

Keel

The Starwind 18 is equipped with a centerboard keel. A centerboard keel is a pivoting lifting keel, allowing to sail both coastal and inland waters.

The boat can sail close to the beach as the draft is just 0.18 - 0.28 meter (0.59 - 0.89 ft) dependent of the load. See immersion rate below.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Starwind 18 is about 62 kg/cm, alternatively 348 lbs/inch.
Meaning: if you load 62 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 348 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Starwind 18 is 3.00.

Compared with other similar dinghies it is slimmer than 82% of all other designs. It seems that the designer has chosen a significantly more speedy hull design.

Maintenance

Boat owner's ideas

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.

Finally

We are always looking for new photos. If you can contribute with photos for Starwind 18 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.

References

[Ref 1]: ISO 8666 Small craft — Principal data.
[Ref 3]: ISO 12215-5 Small craft — Hull construction and scantlings.